⚠️
If you need your gear by a certain date or for an upcoming trip, please contact us before placing your order to confirm the current estimated delivery timeframe.
Item No.: 14270-1206
EVERY FREESTYLER KNOWS THE FIGHT: A SAIL THAT SNAPS POWER ON AND OFF, WON'T GO NEUTRAL WHEN YOU DUCK, AND BUCKS WHEN YOU NEED IT QUIET. THE IDOL REWRITES THAT.
ITS BATTEN FREE CENTER BUILDS POWER SMOOTH AND PROGRESSIVE, GOES DEAD-NEUTRAL THROUGH THE DUCK, THEN RELOADS CLEAN ON THE WAY OUT. SUPER-LIGHT YET BUILT TO SURVIVE EVERY CRASH.
LAND THE MOVE, NOT THE FIGHT. The IDOL is Duotone's freestyle sail for advanced and expert riders who compete or train at the top level of new school freestyle.
Built around the BATTEN FREE CENTER concept and the LIGHT DONE RIGHT construction philosophy, it sheds 200 to 300 g over a conventional design without reducing main panel film thickness. The performance is there every session, not just in the spec sheet.At the heart of the Idol freestyle windsurfing sail is the BATTEN FREE CENTER: a deliberately larger gap between the foot batten and the batten above the boom.
That open section changes how the sail loads up. Instead of a sharp, binary on-off, you get a smooth, progressive power build that makes duck moves feel controllable from the first attempt.
The sail goes neutral exactly when you need it to, then reloads cleanly on the way out. For air moves, the CONVEX DACRON LUFF PANEL maintains full elasticity and keeps the sail loaded up when you need lift against the sail.
You stay in control of the move, not fighting it.The HOLLOW LOWER LEECH locks the profile above the boom and eliminates leech flutter. iROCKET 2.0 batten tensioners are calibrated individually at the factory using a torque wrench.
The 100-micron ULTRA FILM monofilm holds the weight low. DOUBLE SEAM technology covers all crash areas with triple-stitch zig-zag seams, and break-resistant epoxy battens handle whatever competition riding throws at them.Available in sizes 3.6 to 5.2 m² on an RDM mast, the Idol also includes a FOIL EYELET for hybrid foil sessions and the full VTS trim system for fast, accurate rigging.
2027 introduces a new black/violet colorway.Target rider: Advanced to expert windsurfer, new school freestyle and competition Best for: Freestyle competition, duck moves, air moves, foil sessionsKey features:> BATTEN FREE CENTER: smoother power loading, wider wind range, more lift for air moves> LIGHT DONE RIGHT: 200 to 300 g weight reduction without reducing main panel film thickness> CONVEX DACRON LUFF PANEL: elastic luff panel sustains sail load through all jump tricks> iROCKET 2.0 factory-calibrated batten tensions, ready to ride from the first rig> EPOXY BATTENS and DOUBLE SEAM construction: competition-grade durabilityTHE TRICK IS HARD ENOUGH. YOUR SAIL SHOULDN'T BE.
RIG THE IDOL AND MAKE THE MOVE THE ONLY THING YOU'RE FIGHTING FOR.
Sizes and specs
Size (m²)
3.6
4.0
4.4
4.8
5.2
BOOM MAX (CM)
144
148
152
158
162
VTS TAIL TENSION
Min +2 >< Max +4
Min +2 >< Max +4
Min +2 >< Max +4
Min +2 >< Max +4
Min +2 >< Max +4
LUFF MAX (CM)
376
386
400
418
430
VARIO/FIX TOP
VARIO
FIX
FIX
FIX
FIX
BATTENS
4
4
4
4
4
Weight (kg)
2.40
2.50
2.65
2.80
2.95
MAST TYPE (BEST/ALT.)
PLATINUM / GOLD
PLATINUM / GOLD
PLATINUM / GOLD
PLATINUM / GOLD
PLATINUM / GOLD
MAST GEO (BEST/ALT.)
RDM/--
RDM/--
RDM/--
RDM/--
RDM/--
MAST LENGTH (BEST/ALT.)
370/--
370/--
370/--
400/--
400/--
Key features
CONVEX DACRON LUFF-PANEL
Maximum elasticity without distortion from the battens enables maximum lift for all jumps against the sail
BATTEN FREE CENTER
Larger gap between the foot batten and the batten above the boom >> increased wind-range + increased lift for air moves + improved balance & power while ducking
LIGHT DONE RIGHT CONSTRUCTION
Weight reduction of a clearly noticeable 200 to 300 g without reducing the thickness of the main panel thus maintaining the well-known durability and longevity!
HOLLOW LOWER LEECH
Hollow Lower Leech (scooped leech outline) stabilises the profile right above the boom and prevents leech fluttering
iROCKET 2.0
Factory calibrated individual batten tensions using a torque wrench
Video
Technologies
iROCKET 2.0
Super-lightweight and aerodynamic. An inconspicuous detail with a massive impact. iROCKET 2.0 batten tensioners are super-lightweight, aerodynamic and highly stable, consisting of high-quality components such as a self-lubricating, salt-water-resistant brass nut with stainless-steel screw which can withstand all batten tensions. Furthermore, the iROCKET 2.0 is an essential component for a true windsurfing revolution. 100% correct batten tension, correctly adjusted when purchased and forever after. We calibrate each individual batten at the factory according to development specifications. And we don’t just leave it up to blind intuition either – all battens are adjusted to 100% accuracy using torque wrenches. We also apply soluble screw adhesive to the locknuts so that the tension cannot be altered. This means that the batten tension remains absolutely correct and will never have to be adjusted again. The batten key included with the sail is therefore only needed for fine tuning or in the unlikely event of a batten breakage.
XPLY PLUS
What would you prefer? Maximum puncture resistance and UV weathering resistance with minimum stretch? Or (theoretically) improved ripstop properties? We went with option A and developed the most durable laminate on the market. Because the factors of puncture resistance, durability and stretch evidently depend only on the thickness of the film used, we use only 150 or 100 micron thick films for our exclusive XPLY PLUS. In an extensive series of tests, we have developed the ideal combination of necessary film thickness and number of threads. The X.PLY PLUS in particular, at 150 microns in thickness, boasts durability characteristics far in excess of previous laminates at minimal weight. This is also acknowledged by all the big surfing centres and rental equipment providers around the world, who place their trust in the unbeatable quality and longevity of our sails.
3D Top Cap
Optimised pull. On regular top caps and pin systems the webbing is connected in a “one-dimensional” way with the sail body (either side to side or front to back), which transfers the downhaul tension only in certain points. The 3D TOP CAP allows a “three-dimensional” and very widespread transition of the downhaul forces into the sail body. This eliminates top fluttering and ensures a progressive loose leech extending the wind range. The integrated abrasion ribs eliminate the need for heavy, bulky reinforcements at the end of the luff sleeve.
DOUBLE SEAM TECHNOLOGY
Double the durability with half as much stretch. DUOTONE manufactures products of unmatched quality which gives our sails a significantly longer lifetime. A key feature which helps to achieve this is the triple-stitch zig-zag seams. Unlike other products with their single-seam design, these are double-seam. They cover all exposed crash areas, which increases tear resistance and reduces bending-elongation by up to 50%, boosting profile stability and performance.
TT TOP
Improved sail control at higher winds. Designer Kai Hopf originally designed the TT TOP for the WARP. The reduced, concave shape improves tension conditions for a more effective, three-dimensional top twist. This means the top twists not only horizontally, but also vertically under strong winds. By completely neutralising gusts of wind, the rig is kept steady in the rider’s hands, and thus works in a much larger range of winds.
POLYESTER WEBBING ONLY
Eliminating stretch and loss of tension. If it’s good enough for safety harnesses, it’s good enough for windsurfers! We are the only manufacturer to use only polyester webbing for the (vario) top and the tack roller. This advantage of this compared to conventional polypropylene is the negligible amount of stretch. As a result even brand new sails will retain full luff tension and will not need subsequent trimming.
VTS - Visual Trim System
Perfect trim and a huge range of use. You won’t find a quicker or more accurate way of trimming your sail. Even beginners can trim the sail in a matter of seconds to 100% accuracy. All you need to do is pull the luff until the top of the loose leech reaches the “lower wind limit” or “upper wind limit”. The VTS acts as a power boost, ensuring maximum performance and broader range of use.
EPOXY BATTEN
Extremely stable, extremely break-resistant. Depending on the range of use, positioning in the sail and the necessary tension, the batten stress is enormous. In order to prevent breakages, we only fit into all solid battens extremely durable epoxy laminates which really can withstand anything and can live up to DUOTONE’s promises in terms of longevity.
DURATECH FOOT
Long-term guarantee for the sail foot. When starting off on the water or catching up, the foot of the sail is constantly dragged over the nonslip coating, particularly for wide boards. With the exclusive DURATECH FOOT, the seams are completely protected within a large plastic channel so that the surface cannot chafe against seams and material.
INDIVIDUAL BOOM LENGTH INDICATION
The correct boom length without the need for trial and error. Because the boom is attached to the mast at different heights depending on body size, and because this creates a different angle to the mast, the boom length will vary. Specific recommendations for the correct length are printed directly on the luff sleeve at the boom level.
SLEEVE OPENER
Frictionless insertion of the mast into the luff sleeve. An ingenious solution does away with the tedium of inserting the mast. The DUOTONE logo above the boom cutout gently opens the sleeve so that the mast can be threaded with one hand into the luff friction-free, without having to constantly make adjustments to the luff.
SET & GO VARIO TOP
No more trial and error when trying to find the best vario top setting. Even when first rigging up, the correct length of the vario top is found straight away. Clear length indicators mark out the perfect setting with reference to the mast length used, eliminating any need for testing or re-adjustments.
SUPER-LIGHT BUMPER incl. VTS slot
The lightest protector on the market. The integrated vinyl viewing window allows to spot the lower edge of the mast. Once the perfect trim has been found, the optional Velcro patch can be used to “save” this position – saving time and ensuring maximum performance.
DOUBLE D BUCKLE
Inspired by high-strength climbing harnesses and Formula 1 helmets. The exclusive, two-part metal double-D buckle on the vario top, which replaces traditional solutions. This design guarantees the best trimming characteristics and eliminates all webbing slippage.
TWIN STRAP
This keeps the sail rolled up and holds the protector to the mast. A brilliantly simple fastening system which keeps the sail compact and closed after being rolled up and, when on the water, holds the mast protector closely to the mast.
FOIL EYELET
On all foil approved sails the additional lower clew eyelet helps you to position the sail further upright which makes the sail much more efficient when flying on the hydrofoil.
MINI BATTEN
These prevent unwanted leech flutter. Short and highly effective mini-battens which provide support for the areas between the battens and prevent undesirable flutter.
TRIPLE TACK ROLLER 3.0
Find the perfect trim with minimal effort. The integrated, nickel-plated brass triple roller minimises the downhaul forces tremendously.
VTS TAIL OUTHAUL SPECS
Each sail carries individually defined visual indications for the correct outhaul extension (requires VTS TAIL boom).
